Desktop version

Home arrow Education arrow Fillers for Polymer Applications

Source

Cross-References

  • ? Calcium Carbonate Fillers
  • ? Compounding of Particulate-Filled Thermoplastics
  • ? Particulate Fillers, Selection, and Use in Polymer Composites
  • ? Surface Modifiers for Use with Particulate Fillers
  • ? Talcs
  • ? Wollastonites

References

Adams JM, Edmondson B (1987) Forces between particles in continuous and discrete liquid media. In: Briscoe BJ, Adams JM (eds) Tribology in particulate technology. Adam Hilger, Bristol, pp 154-172

Adams JM, Mullier MA, Seville JPK (1987) Agglomeration. In: Briscoe BJ, Adams JM (eds) Tribology in particulate technology. Adam Hilger, Bristol, pp 375-389

Akay G (1990) Flow induced polymer-filler interactions - bound polymer properties and bound polymer-free polymer phase-separation and subsequent phase inversion during mixing. Polym Eng Sci 30:1361-1372

Alexandre M, Dubois P (2000) Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials. Mater Sci Eng 28:1-63

Allard RC, Vu Khanh T, Chalifoux JP (1989) Fatigue crack-propagation in mica-filled polyolefins. Polym Compos 10:62-68

Almeras X, Le Bras M, Hornsby P, Bourbigot S, Marosi G, Keszei S, Poutch F (2003) Effect of fillers on the fire retardancy of intumescent polypropylene compounds. Polym Degrad Stab 82:325-331

Avella M, Cosco S, Di Lorenzo ML, Di Pace E, Errico ME, Gentile G (2006) Nucleation activity of nanosized CaCO3 on crystallization of isotactic polypropylene, in dependence on crystal modification, particle shape, and coating. Eur Polym J 42:1548-1557

Bajaj P, Jha NK, Maurya PL, Misra AC (1987) Flame retardation of polypropylene: effect of organoantimony compounds on the structural and mechanical-properties. J Appl Polym Sci 34:1785-1801

Bajaj P, JhaNK, JhaRK(1989) Effect oftitanate coupling agents on mechanical-properties of mica- filled polypropylene. Polym Eng Sci 29:557-563

Balachandran W (1987) Electrostatic effects in the adhesion of particles to solid surfaces. In: Briscoe BJ, Adams JM (eds) Tribology in particulate technology. Adam Hilger, Bristol, pp 135-153

Barrau S, Demont P, Peigney A, Laurent C, Lacabanne C (2003) DC and AC conductivity of carbon nanotubes-polyepoxy composites. Macromolecules 36:5187-5194

Bertelli G, Camino G, Marchetti E, Costa L, Casorati E, Locatelli R (1989) Parameters affecting fire retardant effectiveness in intumescent systems. Polym Degrad Stab 25:277-292

Bharadwaj RK (2001) Modeling the barrier properties of polymer-layered silicate nanocomposites. Macromolecules 34:9189-9192

Bigg DM (1987) Mechanical-properties of particulate filled polymers. Polym Compos 8:115-122

Bilotti E, Fischer HR, Peijs T (2008) Polymer nanocomposites based on needle-like sepiolite clays: effect of functionalized polymers on the dispersion of nanofiller, crystallinity, and mechanical properties. J Appl Polym Sci 107:1116-1123

Bledzki AK, Gassan J (1999) Composites reinforced with cellulose based fibres. Prog Polym Sci 24:221-274

Bledzki AK, Sperber VE, Faruk O (2002) Natural and wood fibre reinforcement in polymers. Rapra Technology, Shawbury

Bokobza L, Burr A, Garnaud G, Perrin MY, Pagnotta S (2004) Fibre reinforcement of elastomers: nanocomposites based on sepiolite and poly(hydroxyethyl acrylate). Polym Int 53:1060-1065 Bridge B, Folkes MJ, Jahankhani H (1988) Infrared imaging of current distributions in non-uniform conductive composites of polypropylene filled with stainless-steel fibers. J Mater Sci 23:1948-1954

Brown SK (1980) Mechanisms of fracture in filled thermosetting resins. Br Poly J 12:24-30 Bucknall CB (1977) Toughened plastics. Applied Science Publishers, London Busigin C, Lahtinen R, Martinez GM, Thomas G, Woodhams RT (1984) The properties of mica- filled polypropylenes. Polym Eng Sci 24:169-174 Chacko VP, Karasz FE, Farris RJ (1982) Dynamic mechanical-behavior of filled polyethylenes and model composites. Polym Eng Sci 22:968-974

Chiang W-Y, Yang W-D (1988) Polypropylene composites. I. Studies of the effect of grafting of acrylic acid and silane coupling agent on the performance of polypropylene mica composites. J Appl Polym Sci 35:807-823

Choi JS, Lim ST, Choi HJ, Pozsgay A, Szazdi L (2006) Effect of interfacial interaction on the structure and rheological properties of polyamide-6/clay nanocomposites. Compos Interfaces 13:773-782

Christensen RM, Lo KH (1979) Solutions for effective shear properties in 3 phase sphere and cylinder models. J Mech Phys Solids 27:315-330 Christie M (1986) Toughening weld lines of mica-reinforced PP parts. Plast Eng 42:41-45 Cilleruelo L, Lafranche E, Krawczak P, Pardo P, Lucas P (2012) Injection moulding of long glass fibre reinforced poly(ethylene terephtalate): influence of carbon black and nucleating agents on impact properties. Express Polym Lett 6:706-718 Danyadi L, Janecska T, Szabo Z, Nagy G, Moczo J, Pukanszky B (2007a) Wood flour filled PP composites: compatibilization and adhesion. Compos Sci Technol 67:2838-2846 Danyadi L, Renner K, Moczo J, Pukanszky B (2007b) Wood flour filled polypropylene composites: interfacial adhesion and micromechanical deformations. Polym Eng Sci 47:1246-1255 Demjen Z, Pukanszky B, Foldes E, Nagy J (1997) Interaction of silane coupling agents with CaCO3. J Colloid Interface Sci 190:427-436

Demjen Z, Pukanszky B, Nagy J (1999) Possible coupling reactions of functional silanes and polypropylene. Polymer 40:1763-1773

Dickie RA (1978) Mechanical properties (small deformations) of multiphase polymer blends. In: Paul DR (ed) Polymer blends. Academic, New York, pp 353-391 Drago RS, Vogel GC, Needham TE (1971) Four-parameter equation for predicting enthalpies of adduct formation. J Am Chem Soc 93:6014-6026 Evans AG, Williams S, Beaumont PWR (1985) On the toughness of particulate filled polymers. J Mater Sci 20:3668-3674

Faulkner DL, Schmidt LR (1977) Glass bead-filled polypropylene. 1. Rheological and mechanical- properties. Polym Eng Sci 17:657-665

Fekete E, Pukanszky B, Toth A, Bertoti I (1990) Surface modification and characterization of particulate mineral fillers. J Colloid Interface Sci 135:200-208 Fekete E, Molnar S, Kim GM, Michler GH, Pukanszky B (1999) Aggregation, fracture initiation, and strength of PP/CaCO3 composites. J Macromol Sci-Phys B38:885-899 Fekete E, Moczo J, Pukanszky B (2004) Determination of the surface characteristics of particulate fillers by inverse gas chromatography at infinite dilution: a critical approach. J Colloid Interface Sci 269:143-152

Felix JM, Gatenholm P (1991) The nature of adhesion in composites of modified cellulose fibers and polypropylene. J Appl Polym Sci 42:609-620 Fisa B, Dufour J, Vukhanh T (1987) Weldline integrity of reinforced-plastics - effect of filler Shape. Polym Compos 8:408-418

Folkes MJ, Wong WK (1987) Determination of interfacial shear-strength in fiber-reinforced thermoplastic composites. Polymer 28:1309-1314 Fowkes FM (1964) Attractive forces at interfaces. Ind Eng Chem 56:40-52 Fowkes FM (1981) Acid-base interactions in polymer adhesion. In: Mittal RK (ed) Physicochemical aspects of polymer surfaces. Plenum, New York, pp 583-603 Fox HW, Hare EF, Zisman WA (1955) Wetting properties of organic liquids on high-energy surfaces. J Phys Chem 59:1097-1106

Friedrich K, Karsch UA (1983) Failure processes in particulate filled polypropylene. Fibre Sci Technol 18:37-52

Fujiyama M, Wakino T (1991) Structures and properties of injection moldings of crystallization nucleator-added polypropylenes. 1. Structure property relationships. J Appl Polym Sci 42:2739-2747

Goodier JN (1933) Concentration of stress around spherical and cylindrical inclusions and flaws. J Appl Mech 55:39-44

Gupta VB, Mittal RK, Sharma PK, Mennig G, Wolters J (1989) Some studies on glass fiber- reinforced polypropylene. 1. Reduction in fiber length during processing. Polym Compos 10:8-15

Gutmann V (1978) The donor-acceptor approach to molecular interactions. Plenum, New York Gutowski W (1990) Effect of fiber-matrix adhesion on mechanical-properties of composites. In: Ishida H (ed) Controlled interphases in composite materials. Elsevier, New York, pp 505-520 Hadal R, Dasari A, Rohrmann J, Misra RDK (2004a) Susceptibility to scratch surface damage of wollastonite- and talc-containing polypropylene micrometric composites. Mater Sci Eng A380:326-339

Hadal RS, Dasari A, Rohrmann J, Misra RDK (2004b) Effect of wollastonite and talc on the micromechanisms of tensile deformation in polypropylene composites. Mater Sci Eng A372:296-315

Halpin JC, Kardos JL (1976) Halpin-Tsai equations - review. Polym Eng Sci 16:344-352 Hornsby PR, Watson CL (1989) Mechanism of smoke suppression and fire retardancy in polymers containing magnesium-hydroxide filler. Plast Rubber Process Appl 11:45-51 Hutley TJ, Darlington MW (1984) Impact strength Dsc correlation in mineral-filled polypropylene. Polym Commun 25:226-228

Iisaka K, Shibayama K (1978) Mechanical alpha-dispersion and interaction in filled polystyrene and polymethylmethacrylate. J Appl Polym Sci 22:3135-3143 Imre B, Keledi G, Renner K, Moczo J, Murariu M, Dubois P, Pukanszky B (2012) Adhesion and micromechanical deformation processes in PLA/CaSO4 composites. Carbohydr Polym 89:759-767

Ishai O, Cohen LJ (1968) Effect of fillers and voids on compressive yield of epoxy composites. J Compos Mater 2:302-315

Jancar J, Kucera J (1990a) Yield behavior of polypropylene filled with CaCO3 and Mg(OH)2.

1. Zero interfacial adhesion. Polym Eng Sci 30:707-713 Jancar J, Kucera J (1990b) Yield behavior of PP/CaCO3 and PP/Mg(OH)2 composites. II: enhanced interfacial adhesion. Polym Eng Sci 30:714-720

Jancar J, Dibenedetto AT, Dianselmo A (1993) Effect of adhesion on the fracture toughness of calcium carbonate-filled polypropylene. Polym Eng Sci 33:559-563 Jeffrey DJ, Acrivos A (1976) Rheological properties of suspensions of rigid particles. Aiche J 22:417-432

Jerabek M, Major Z, Renner K, Moczo J, Pukanszky B, Lang RW (2010) Filler/matrix-debonding and micro-mechanisms of deformation in particulate filled polypropylene composites under tension. Polymer 51:2040-2048

Kamal MR, Song L, Singh P (1986) Measurement of fiber and matrix orientations in fiber reinforced composites. Polym Compos 7:323-329 Karger-Kocsis J, Csikai I (1987) Skin-core morphology and failure of injection-molded specimens of impact-modified polypropylene blends. Polym Eng Sci 27:241-253 Katz HS, Milevski JV (1978) Handbook of fillers and reinforcements for plastics. Van Nostrand, New York

Kerch GM, Irgen LA (1985) Thermal-analysis of the interaction between components in polypropylene and polyethylene blends. Thermochim Acta 93:155-157 Krysztafkiewicz A (1988) Surface-modified fillers for reinforcing elastomers. Surf Coat Technol 35:151-170

Kubat J, Szalanczi A (1974) Polymer-glass separation in the spiral mold test. Polym Eng Sci 14:873-877

Lincoln DM, Vaia RA, Wang ZG, Hsiao BS, Krishnamoorti R (2001) Temperature dependence of polymer crystalline morphology in nylon 6/montmorillonite nanocomposites. Polymer 42:9975-9985

Mader E, Freitag K-H (1990) Interface properties and their influence on short fibre composites. Composites 21:397-402

Maiti SN, Mahapatro PK (1989) Crystallization of PP in PP/Ni composites and its correlation with tensile properties. J Appl Polym Sci 37:1889-1899 Maiti SN, Mahapatro PK (1990) Crystallization of i-PP/CaCO3 composites and its correlation with tensile properties. Int J Polym Mater 14:205-222 Maiti SN, Mahapatro PK (1991) Mechanical-properties of i-PP/CaCO3 composites. J Appl Polym Sci 42:3101-3110

Maiti P, Nam PH, Okamoto M, Hasegawa N, Usuki A (2002) Influence of crystallization on intercalation, morphology, and mechanical properties of polypropylene/clay nanocomposites. Macromolecules 35:2042-2049

Mansfield KF, Theodorou DN (1991) Atomistic simulation of a glassy polymer/graphite interface. Macromolecules 24:4295-4309

Marosi G, Bertalan G, Rusznak I, Anna P (1987) Role of interfacial layers in the properties of particle-filled polyolefin systems. Colloid Surf 23:185-198 Matienzo LJ, Shah TK (1986) Surface-treatment of phlogopite particles for composite applications - XPS and Drift studies. Surf Interface Anal 8:53-59 Maurer FHJ (1986) Interphase effects on viscoelastic properties of polymer composites. In: Sedlacek B (ed) Polymer composites. Walter de Gruyter, Berlin, pp 399-411 Maurer FHJ, Schoffeleers HM, Kosfeld R, Uhlenbroich T (1982) Analysis of polymer-filler interaction in filled polyethylene. In: Hayashi T, Kawata K, Umekawa S (eds) Progress in science and engineering of composites. ICCM-IV, Tokyo, pp 803-809 Maurer FHJ, Kosfeld R, Uhlenbroich T (1985) Interfacial interaction in kaolin-filled polyethylene composites. Colloid Polym Sci 263:624-630

McGee S, McGullough RL (1981) Combining rules for predicting the thermoelastic properties of particulate filled polymers, polymers, polyblends, and foams. Polym Compos 2:149-161

Meddad A, Fisa B (1997) Stress-strain behavior and tensile dilatometry of glass bead-filled polypropylene and polyamide 6. J Appl Polym Sci 64:653-665 Menczel J, Varga J (1983) Influence of nucleating-agents on crystallization of polypropylene.

1. Talc as a nucleating-agent. J Therm Anal 28:161-174 Miltner HE, Van Assche G, Pozsgay A, Pukanszky B, Van Mele B (2006) Restricted chain segment mobility in poly(amide) 6/clay nanocomposites evidenced by quasi-isothermal crystallization. Polymer 47:826-835

Mittal RK, Gupta VB, Sharma P (1987) The effect of fiber orientation on the interfacial shear-stress in short fiber-reinforced polypropylene. J Mater Sci 22:1949-1955 Moczo J, Fekete E, Pukanszky B (2002) Acid-base interactions and interphase formation in particulate-filled polymers. J Adhes 78:861-875

Moczo J, Fekete E, Laszlo K, Pukanszky B (2003) Aggregation of particulate fillers: factors, determination, properties. Macromol Symp 194:111-124 Moczo J, Fekete E, Pukanszky B (2004) Adsorption of surfactants on CaCO3 and its effect on surface free energy. Prog Colloid Polym Sci 125:134-141 Molnar K, Moczo J, Murariu M, Dubois P, Pukanszky B (2009) Factors affecting the properties of PLA/CaSO4 composites: homogeneity and interactions. Express Polym Lett 3:49-61 Nakagawa H, Sano H (1985) In improvement of impact resistance of calcium carbonate filled polypropylene and poly-ethylene block copolymer. American Chemical Society, Polymer Preprints, Division of Polymer Chemistry, Chicago, pp 249-250 (M., C. B., Ed.)

Nicolais L, Narkis M (1971) Stress-strain behavior of styrene-acrylonitrile/glass bead composites in the glassy region. Polym Eng Sci 11:194-199

Nielsen LE (1974) Mechanical properties of polymers and composites. Marcel Dekker, New York

Okuno K, Woodhams RT (1975) Mica reinforced polypropylene. Polym Eng Sci 15:308-315 Olmos D, Bagdi K, Mozco J, Pukanszky B, Gonzalez-Benito J (2011) Morphology and interphase formation in epoxy/PMMA/glass fiber composites: effect of the molecular weight of the PMMA. J Colloid Interface Sci 360:289-299

Parrinello LM (1991) Fiber geometry-effects on physical-properties of chopped fiber composites. Tappi J 74:85-88

Pinnavaia TJ, Beall GW (2001) Polymer-clay nanocomposites. Wiley, New York Potschke P, Kretzschmar B, Janke A (2007) Use of carbon nanotube filled polycarbonate in blends with montmorillonite filled polypropylene. Compos Sci Technol 67:855-860 Pozsgay A, Frater T, Papp L, Sajo I, Pukanszky B (2002) Nucleating effect of montmorillonite nanoparticles in polypropylene. J Macromol Sci B41:1249-1265 Pukanszky B (1990) Influence of interface interaction on the ultimate tensile properties of polymer composites. Composites 21:255-262

Pukanszky B (1992) Effect of interfacial interactions on the deformation and failure properties of PP/CaCO3 composites. New Poly Mater 3:205-217 Pukanszky B (1995) Particulate filled polypropylene: structure and properties. In: Karger-Kocsis J (ed) Polypropylene: structure, blends and composites - composites. Chapman and Hall, London, pp 1 -70

Pukanszky B (2000) Polyolefine composites: interfacial phenomena and properties. In: Vasile C (ed) Handbook of polyolefins. Marcel Dekker, New York, pp 689-722 Pukanszky B, Maurer FHJ (1995) Composition dependence of the fracture-toughness of heterogeneous polymer systems. Polymer 36:1617-1625

Pukanszky B, Ttidos F (1990) Indirect determination of interphase thickness from the mechanical- properties of particulate filled polymers. In: Ishida H (ed) Controlled interphases in composite materials. Elsevier, New York, pp 691-700

Pukanszky B, Voros G (1993) Mechanism of interfacial interactions in particulate filled composites. Compos Interfaces 1:411-427

Pukanszky B, Voros G (1996) Stress distribution around inclusions, interaction, and mechanical properties of particulate-filled composites. Polym Compos 17:384-392 Pukanszky B, Turcsanyi B, Ttidos F (1988) Effect of interfacial interaction on the tensile yield stress of polymer composites. In: Ishida H (ed) Interfaces in polymer, ceramic, and metal matrix composites. Elsevier, New York, pp 467-477

Pukanszky B, Fekete E, Ttidos F (1989) Surface-tension and mechanical-properties in polyolefin composites. Macromol Chem Macromol Symp 28:165-186 Pukanszky B, Belina K, Rockenbauer A, Maurer FHJ (1994a) Effect of nucleation, filler anisotropy and orientation on the properties of PP composites. Composites 25:205-214 Pukanszky B, van Ess M, Maurer FHJ, Voros G (1994b) Micromechanical deformations in particulate filled thermoplastics: volume strain-measurements. J Mater Sci 29:2350-2358 Pukanszky B, Mudra I, Staniek P (1997) Relation of crystalline structure and mechanical properties of nucleated polypropylene. J Vinyl Addit Technol 3:53-57

Ramsteiner F, Theysohn R (1984) On the tensile behavior of filled composites. Composites 15:121-128

Ray SS, Okamoto M (2003) Polymer/layered silicate nanocomposites: a review from preparation to processing. Prog Polym Sci 28:1539-1641

Renner K, Moczo J, Pukanszky B (2009) Deformation and failure of PP composites reinforced with lignocellulosic fibers: effect of inherent strength of the particles. Compos Sci Technol 69:1653-1659

Renner K, Moczo J, Suba P, Pukanszky B (2010) Micromechanical deformations in PP/lignocellulosic filler composites: effect of matrix properties. Compos Sci Technol 70:1141-1147

Riley AM, Paynter CD, McGenity PM, Adams JM (1990) Factors affecting the impact properties of mineral filled polypropylene. Plast Rub Proc Appl 14:85-93 Rockenbauer A, Jokay L, Pukanszky B, Tudos F (1985) Electron-paramagnetic resonance investigation of orientation produced by mechanical processing in the fillers of polymer composites. Macromolecules 18:918-923

Rothon R (2007) The high performance fillers market and the position of precipitated calcium carbonate and silica. In: High performance fillers, Hamburg. Smithers Rapra, Hamburg, pp paper 1 (1 -4)

Rybnikar F (1991) Interactions in the system isotactic polypropylene calcite. J Appl Polym Sci 42:2727-2737

Sadler EJ, Vecere AC (1995) Silane treatment of mineral fillers - practical aspects. Plast Rubber Compos Process Appl 24:271-275

Samuels RJ (1974) Structured polymer properties, the identification, interpretation, and application of crystalline polymer structure. Wiley, New York Sanou M, Chung B, Cohen C (1985) Glass fiber-filled thermoplastics 2. Cavity filling and fiber orientation in injection molding. Polym Eng Sci 25:1008-1016 Schlumpf HP (1983) Fillers and reinforcing materials in plastics: physicochemical aspects for the processor. Kunstst-Ger Plast 73:511-515

Stamhuis JE, Loppe JPA (1982) Rheological determination of polymer-filler affinity. Rheol Acta 21:103-105

Stoklasa K, Tomis F, Navratil Z (1985) Investigation of polymer systems using thermomechanical analysis. Thermochim Acta 93:221-224

Sudar A, Moczo J, Voros G, Pukanszky B (2007) The mechanism and kinetics of void formation and growth in particulate filled PE composites. Express Polym Lett 1:763-772 Takase S, Shiraishi N (1989) Studies on composites from wood and polypropylenes. II. J Appl Polym Sci 37:645-659

Tausz SE, Chaffey CE (1982) Ultrasonically de-laminated and coarse mica particles as reinforcements for polypropylene. J Appl Polym Sci 27:4493-4500 Trantina GG (1984) Fatigue life prediction of filled polypropylene based on creep-rupture. Polym Eng Sci 24:1180-1184

Trotignon JP, Verdu J, De Boissard R, De Vallois A (1986) Polypropylene-mica composites. In: Sedlacek B (ed) Polymer composites. Walter de Gruyter, Berlin, pp 191-198 Turcsanyi B, Pukanszky B, TMos F (1988) Composition dependence of tensile yield stress in filled polymers. J Mater Sci Lett 7:160-162

Varga J, Toth FS (1991) Filled compounds of the beta-modification of polypropylene. Angew Makromol Chem 188:11-25

Velasco JI, Morhain C, Martinez AB, Rodriguez-Perez MA, de Saja JA (2002) The effect of filler type, morphology and coating on the anisotropy and microstructure heterogeneity of injection- moulded discs of polypropylene filled with aluminium and magnesium hydroxides. Part 1. A wide-angle X-ray diffraction study. Polymer 43:6805-6811 Verbeek J, Christopher M (2012) Mica-reinforced polymer composites. In: Thomas S, Kuruvilla J, Malhotra SK, Goda K, Sreekala MS (eds) Polymer composites. Wiley, Weinheim, pp 673-713

Voelker MJ (1991) Low-temperature impact properties of long fiber thermoplastic composite molding materials. Polym Compos 12:119-121

Vollenberg P (1987) The mechanical behaviour of particle filled thermoplastics. Eindhoven University of Technology, Eindhoven

Vollenberg PHT, Heikens D (1989) Particle size dependence of the young’s modulus of filled polymers: 1. Preliminary experiments. Polymer 30:1656-1662 Vollenberg PHT, Heikens D (1990) The mechanical-properties of chalk-filled polypropylene - a preliminary investigation. J Mater Sci 25:3089-3095 Voros G, Pukanszky B (2001) Effect of a soft interlayer with changing properties on the stress distribution around inclusions and yielding of composites. Composites A32:343-352 Voros G, Fekete E, Pukanszky B (1997) An interphase with changing properties and the mechanism of deformation in particulate-filled polymers. J Adhes 64:229-250 Vu Khanh T, Sanschagrin B, Fisa B (1985) Fracture of mica-reinforced polypropylene - mica concentration effect. Polym Compos 6:249-260

Weidenfeller B, Hofer M, Schilling FR (2005) Cooling behaviour of particle filled polypropylene during injection moulding process. Composites A36:345-351 Wong CP, Bollampally RS (1999) Thermal conductivity, elastic modulus, and coefficient of thermal expansion of polymer composites filled with ceramic particles for electronic packaging. J Appl Polym Sci 74:3396-3403

Wu S (1974) Interfacial and surface tensions of polymers. J Macromol Sci 10:1-73 Yano K, Usuki A, Okada A, Kurauchi T, Kamigaito O (1993) Synthesis and properties of polyimide/clay hybrid. J Polym Sci A31:2493-2498 Zolotnitsky M, Steinmetz JR (1995) Comparative study of organofunctional water-borne silanes as couplants in nylon-66 composites. J Vinyl Addit Technol 1:109-113 Zuchowska D, Hlavata D (1991) Some physical-properties of polypropylene phenolic microsphere blends. Eur Polym J 27:355-357

 
Source
Found a mistake? Please highlight the word and press Shift + Enter  
< Prev   CONTENTS   Next >

Related topics